{"title":"STACKER BAR STORAGE","description":"\u003cp\u003e\u003cspan\u003eStackers are great until they start taking over the safe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFrozen Forge stacker storage boxes are designed to keep \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esilver, gold, and copper stacker bars\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e separated, organized, and easier to store without everything ending up in one heavy pile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach design is built around the dimensions of the specific bar or capsule style listed in the product description. Fit is based on the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eoutside dimensions of the bar or holder\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, not simply the weight stamped on the metal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease check the listing photos and compatibility notes carefully before ordering, especially since different mints and capsule styles can vary in size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBars, capsules, and bullion shown in photos are for display purposes only unless specifically stated otherwise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Yetis prefer their stacks organized. Mostly because they keep losing count.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"1oz-silver-copper-storage-box-container-1oz-bars-stackers-in-capsules-10-slot","title":"1 oz Silver Bar Stacker Capsule Storage Box 10 Slot Universal Bullion Holder","description":"\u003cp\u003e\u003cstrong\u003e10 SLOT 1 OZ SILVER BAR \/ STACKER STORAGE BOX\u003cbr\u003e\u003c\/strong\u003e(because bars deserve their own little parking spaces too)\u003c\/p\u003e\n\u003cp\u003eKeep Your Bars Organized, Protected, and Ready to Store. Designed and 3D printed by Frozen Forge, this storage box is purpose-built for 1 oz silver bars and stackers stored in capsules.\u003c\/p\u003e\n\u003cp\u003eIt holds up to 10 encapsulated bars vertically in individual slots and is designed to accommodate Air-Tite and many similarly sized generic square capsules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Brand: Frozen Forge\u003cbr\u003e• Type: Bar \/ Bullion Storage Box\u003cbr\u003e• Capacity: 10 capsules\u003cbr\u003e• Designed For: 1 oz silver bars and stackers in capsules\u003cbr\u003e• Compatible With: Air-Tite and many similarly sized square capsules\u003cbr\u003e• Material: PLA \/ PLA+ – 3D Printed\u003cbr\u003e• Lid: Removable friction-fit lid\u003cbr\u003e• Color: See available color list below\u003cbr\u003e• Made In: USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFIT \/ COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box is designed for encapsulated 1 oz bars and stackers.\u003c\/p\u003e\n\u003cp\u003eCommon uses include:\u003c\/p\u003e\n\u003cp\u003e• 1 oz silver bars in capsules\u003cbr\u003e• 1 oz silver stackers in capsules\u003cbr\u003e• Engelhard bars in compatible capsules\u003cbr\u003e• Generic 1 oz silver bars\u003cbr\u003e• 1 oz copper bars and stackers\u003cbr\u003e• Other similarly sized encapsulated bullion\u003c\/p\u003e\n\u003cp\u003eAir-Tite capsules are recommended, but many similarly sized generic square capsules may also fit.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003eIMPORTANT: Fit is based on the outside dimensions of the capsule, not simply the weight or size of the bar inside.Capsule dimensions can vary between manufacturers, so specialty or unusually sized capsules are not guaranteed to fit.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are unsure whether your capsules will fit, send us a message before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Holds up to 10 encapsulated 1 oz bars or stackers\u003cbr\u003e• Individual slots keep capsules separated and organized\u003cbr\u003e• Compact, stackable design\u003cbr\u003e• Snug friction-fit lid\u003cbr\u003e• 3D printed in-house by Frozen Forge\u003cbr\u003e• Small-batch production\u003cbr\u003e• Printed low and slow for a cleaner, more consistent finish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE COLORS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCharcoal Black (Matte\/Default), Dark Black, White, Grey, Blue Grey, Brown, Skin\/Nude, Light Oak, Dark Blue, Galaxy Blue, Teal Blue, Tiffany Blue, Royal Blue, Slate Marble Blue, Firefly Blue, Bright Red, Firehose Red, Dark Red, Maroon Red, Easter Green, Lime Green, Highlighter Green (Scallion), Grass Green, Army Green, Hunter\/Forest Green, Morandi Green, Orange, Yellow, Highlighter Yellow, Pink, Lilac Purple, Willy Wonka Purple, Dark Purple, Galaxy Purple, Gold, Frosted\/Clear, and Glow in the Dark.\u003c\/p\u003e\n\u003cp\u003eCharcoal Black (Matte) is the default unless another color is requested.\u003c\/p\u003e\n\u003cp\u003eSpecialty colors may vary slightly between filament batches.\u003c\/p\u003e\n\u003cp\u003eIf you want a specific color, please message us before ordering to confirm availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABOUT THE PRINT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product, so normal layer lines, slight surface texture, and a visible print seam may be present. These are normal characteristics of the printing process and are not defects.\u003c\/p\u003e\n\u003cp\u003eWe like to say we “cook low and slow.” Why? Because rushing a print to save time usually means sacrificing finish and quality. The Yetis are impatient. We are not.\u003c\/p\u003e\n\u003cp\u003eWe photograph our actual products so you can see the finish and construction before purchasing. The box you receive may not be the exact one pictured, but it’ll be about as close as a Yeti can get to you in the woods before you start asking questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLID\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box uses a snug friction-fit lid with no clips or latches.\u003c\/p\u003e\n\u003cp\u003eIf it feels tight when new, gently wiggle the lid from side to side while pulling upward. A little resistance is intentional and may loosen slightly with use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM CAPACITIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed more than 10 slots?\u003c\/p\u003e\n\u003cp\u003eBecause these boxes are designed and printed in-house, we can often make other capacities.\u003c\/p\u003e\n\u003cp\u003eSend us a message with what you need and we’ll see what we can do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIN ALL SERIOUSNESS, PLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBars, capsules, and other bullion shown in photos are for display purposes only and are NOT included.\u003c\/p\u003e\n\u003cp\u003eThis box is designed for encapsulated 1 oz bars and stackers. Fit depends on the outside dimensions of the capsule being used.\u003c\/p\u003e\n\u003cp\u003eOther capsule brands or specialty holders may not fit.\u003c\/p\u003e\n\u003cp\u003eColors may vary slightly due to filament batches, lighting, and screen settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFROZEN FORGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for collectors. Printed by Yetis. Apparently.\u003c\/p\u003e\n\u003cp\u003eWhy Yetis? We just like Yetis. We also really like dogs, and one of ours is named Yeti. At some point the whole thing got out of hand and now they apparently run the printers.\u003c\/p\u003e\n\u003cp\u003eEverything is designed and printed in-house in the USA in small batches. If we wouldn't use it ourselves, it doesn't leave the Forge.\u003c\/p\u003e","brand":"Frozen Forge","offers":[{"title":"Default Title","offer_id":67585054998713,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/6135\/2377\/files\/Screenshot2026-10-22164825.png?v=1792702153"},{"product_id":"1oz-bullion-bar-storage-box-holds-20-large-capsule-bars-silver-gold-copper","title":"20 Slot 1 oz Bullion Bar Storage Box Large Capsule Silver Gold Copper Holder","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e20 SLOT BIG 1 OZ SILVER BAR \/ STACKER STORAGE BOX\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e\u003cspan\u003e(for the chunky capsules that refuse to fit anywhere else)\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKeep Your Bars Organized, Protected, and Ready to Store.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned and 3D printed by Frozen Forge, this storage box is purpose-built for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBIG 1 oz silver bar and stacker capsules\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt holds up to 20 encapsulated bars vertically in individual slots and was specifically designed around the larger protective capsules that use a wider internal foam gasket.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis is NOT designed for traditional or standard 1 oz bar capsules.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDETAILS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Brand: Frozen Forge\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Type: Bar \/ Bullion Storage Box\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Capacity: 20 capsules\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Designed For: BIG 1 oz silver bar \/ stacker capsules\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Approximate Capsule Size: 2.64\" long x 1.66\" high x 0.42\" wide\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Material: PLA \/ PLA+ – 3D Printed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Lid: Removable friction-fit lid\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Approximate Box Dimensions: 6\" wide x 5 5\/8\" long x 2 1\/8\" high\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Approximate Weight: 7.7 oz empty\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Color: See available color list below\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Made In: USA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFIT \/ COMPATIBILITY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis box was originally designed for a customer who needed storage for larger 1 oz bar \/ stacker capsules, and we liked the result enough to offer it to everyone else.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is designed around capsules measuring approximately:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• 2.64\" in length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 1.66\" in height\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 0.42\" in width\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are larger protective capsules with a wider foam gasket surrounding the bar.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT: These are NOT traditional 1 oz bar or stacker capsules.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFit is based on the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eoutside dimensions of the capsule\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, not simply the weight or dimensions of the silver bar inside.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOther capsule brands may have thicker walls, taller edges, or slightly different outside dimensions and may not fit properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease review the listing photos to see the style of capsule used when designing this box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you are unsure whether your capsules will fit, send us a message before ordering and we will gladly help confirm compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFEATURES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Holds up to 20 BIG encapsulated 1 oz bars or stackers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Individual slots keep capsules separated and organized\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Designed specifically for larger foam-gasket style capsules\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Slight clearance allows for easier placement and removal\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Compact, stackable design\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Snug friction-fit lid\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 3D printed in-house by Frozen Forge\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Small-batch production\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Printed low and slow for a cleaner, more consistent finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAVAILABLE COLORS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCharcoal Black (Matte\/Default), Dark Black, White, Grey, Blue Grey, Brown, Skin\/Nude, Light Oak, Dark Blue, Galaxy Blue, Teal Blue, Tiffany Blue, Royal Blue, Slate Marble Blue, Firefly Blue, Bright Red, Firehose Red, Dark Red, Maroon Red, Easter Green, Lime Green, Highlighter Green (Scallion), Grass Green, Army Green, Hunter\/Forest Green, Morandi Green, Orange, Yellow, Highlighter Yellow, Pink, Lilac Purple, Willy Wonka Purple, Dark Purple, Galaxy Purple, Gold, Frosted\/Clear, and Glow in the Dark.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCharcoal Black (Matte) is the default unless another color is requested.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecialty colors may vary slightly between filament batches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you want a specific color, please message us before ordering to confirm availability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eABOUT THE PRINT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 3D-printed product, so normal layer lines, slight surface texture, and a visible print seam may be present. These are normal characteristics of the printing process and are not defects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe like to say we “cook low and slow.” Why? Because rushing a print to save time usually means sacrificing finish and quality. The Yetis are impatient. We are not.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe photograph our actual products so you can see the finish and construction before purchasing. The box you receive may not be the exact one pictured, but it’ll be about as close as a Yeti can get to you in the woods before you start asking questions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eLID\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis box uses a snug friction-fit lid with small retention bumps on the front and back.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo open, hold the box vertically from the sides and gently wiggle the lid left to right while pulling upward. Once the lid moves past the retention points, it should open normally.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA little resistance is intentional and may loosen slightly with use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCUSTOM CAPACITIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNeed more than 20 slots?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBecause these boxes are designed and printed in-house, we can often make other capacities.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSend us a message with what you need and we’ll see what we can do.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIN ALL SERIOUSNESS, PLEASE NOTE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBars, capsules, and other bullion shown in photos are for display purposes only and are NOT included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis box is designed specifically for the larger BIG 1 oz bar \/ stacker capsules described above.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIt is NOT designed for standard 1 oz bar capsules.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFit depends on the outside dimensions of the capsule being used. Other capsule brands or specialty holders may not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eColors may vary slightly due to filament batches, lighting, and screen settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFROZEN FORGE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt for collectors. Printed by Yetis. Apparently.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhy Yetis? We just like Yetis. We also really like dogs, and one of ours is named Yeti. At some point the whole thing got out of hand and now they apparently run the printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEverything is designed and printed in-house in the USA in small batches. If we wouldn't use it ourselves, it doesn't leave the Forge.\u003c\/span\u003e\u003c\/p\u003e","brand":"Frozen Forge","offers":[{"title":"Default Title","offer_id":67585055195321,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/6135\/2377\/files\/Screenshot2026-09-26200537.png?v=1790467575"},{"product_id":"10-slot-1oz-silver-bar-stacker-capsule-storage-box-air-tite-holder-pick-color","title":"10 Slot 1oz Silver Bar Stacker Capsule Storage Box Air-Tite Holder - Pick Color","description":"\u003cp\u003e\u003cstrong\u003e10 SLOT 1 OZ SILVER BAR STORAGE BOX — AIR-TITE CAPSULES\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Because your Air-Tite capsules deserve a parking space that actually fits.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep Your Silver Bars Organized, Protected, and Ready to Store\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and 3D printed in-house by Frozen Forge, this storage box holds up to 10 compatible Air-Tite capsules containing 1 oz silver bars or stackers.\u003c\/p\u003e\n\u003cp\u003eThis isn't a generic bullion box that happens to fit. Each individual slot is designed around the rounded-corner Air-Tite capsule dimensions for a snugger fit with minimal side-to-side movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS\u003c\/strong\u003e\u003cbr\u003eBrand: Frozen Forge\u003cbr\u003eType: Silver Bar \/ Bullion Storage Box\u003cbr\u003eCapacity: 10 capsules\u003cbr\u003eDesigned For: 1 oz silver bars and stackers in Air-Tite capsules\u003cbr\u003eCapsule Fit: Air-Tite rounded-corner bar capsules\u003cbr\u003eMaterial: PLA \/ PLA+ (3D Printed)\u003cbr\u003eLid: Snug friction-fit with retention bumps\u003cbr\u003eColors: 42 available options\u003cbr\u003eMade In: USA\u003cbr\u003eWeight: Approximately 3–4 oz empty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFIT \/ COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically around the outside dimensions of Air-Tite rounded-corner capsules used for 1 oz silver bars and stackers.\u003c\/p\u003e\n\u003cp\u003eEach capsule sits in its own individual slot, helping reduce side-to-side movement during normal storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e This box is designed for Air-Tite capsules with rounded corners. It is NOT designed for Squared Off capsules, which use different exterior dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFit is determined by the outside dimensions and style of the capsule, NOT simply the weight, dimensions, or brand of the silver bar inside. We do not guarantee compatibility based on the bullion bar itself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOther capsule brands may have different outside dimensions, corner shapes, or wall thicknesses and are not guaranteed to fit.\u003c\/p\u003e\n\u003cp\u003ePlease review the listing photos showing the compatible and incompatible capsules.\u003c\/p\u003e\n\u003cp\u003eUnsure about your capsules? Message us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE COLORS — 42 OPTIONS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnlike some of the competition, our Yetis don't believe in limiting your choices.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eChoose from over 40 filament colors, including metallic, glitter, glow-in-the-dark, and specialty finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO ORDER:\u003c\/strong\u003e Check the numbered color charts in the listing photos and send us your preferred color number (1–42).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEFAULT COLOR:\u003c\/strong\u003e If no color is specified, your box will be printed in Black (#24).\u003c\/p\u003e\n\u003cp\u003eThe complete color reference is at the bottom of this listing. Questions? Just ask!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; PRINT QUALITY\u003c\/strong\u003e\u003cbr\u003e• Holds up to 10 compatible Air-Tite bar capsules\u003cbr\u003e• Individual slots designed around rounded-corner capsule dimensions\u003cbr\u003e• Snug fit with minimal side-to-side movement\u003cbr\u003e• Compact storage design\u003cbr\u003e• Friction-fit lid with retention bumps\u003cbr\u003e• Designed and 3D printed in-house in the USA\u003cbr\u003e• Small-batch production, printed low and slow\u003c\/p\u003e\n\u003cp\u003eWe don't rush our prints to shave off a few minutes. Every box is produced with attention to finish, fit, and consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Yetis are impatient. We are not.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAs with any 3D-printed product, normal layer lines and slight surface texture may be present. These are characteristics of the printing process, not defects.\u003c\/p\u003e\n\u003cp\u003eOur photos show actual printed products. Your box may not be the exact one pictured, but it'll be about as close as a Yeti can get to you in the woods before you start asking questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABOUT THE LID\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box uses a snug friction-fit lid with small retention bumps on the front and back. The lid seats securely without separate clips or latches.\u003c\/p\u003e\n\u003cp\u003eTo open, hold the box by its sides and gently wiggle the lid left to right while pulling upward to move it past the retention bumps.\u003c\/p\u003e\n\u003cp\u003eSome resistance is intentional, and the fit may loosen slightly with repeated use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM CAPACITIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed more or fewer than 10 slots? Since we design and print everything in-house, we can often accommodate different capacities depending on the design.\u003c\/p\u003e\n\u003cp\u003eMessage us with what you need, and we'll see what the Yetis can manage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHIPPING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFree shipping with careful packaging. Most orders ship the next business day, depending on production and order volume. Please allow additional processing time during busy periods or for custom colors.\u003c\/p\u003e\n\u003cp\u003ePurchasing multiple boxes? Message us before ordering so we can discuss available combined-order options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003cbr\u003e• Silver bars, bullion, and capsules shown in photos are for display purposes only and are NOT included.\u003cbr\u003e• Confirmed fit applies to the compatible Air-Tite rounded-corner bar capsules shown in the listing photos, not to individual bullion bars independently.\u003cbr\u003e• Squared Off capsules are NOT compatible with this design.\u003cbr\u003e• Other capsule brands or styles may not fit as intended.\u003cbr\u003e• Colors may vary slightly due to lighting, screen settings, and filament batches.\u003cbr\u003e• Specialty, gradient, and multicolor filaments may vary from print to print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFROZEN FORGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt for collectors. Printed by Yetis. Apparently.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWhy Yetis? We like Yetis. We also really like dogs, and one of ours is named Yeti. Somewhere along the way, the whole thing got out of hand, and now they apparently run the printers.\u003c\/p\u003e\n\u003cp\u003eEverything is designed and printed in-house in the USA. If we wouldn't use it ourselves, it doesn't leave the Forge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42-COLOR FILAMENT REFERENCE\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eMatch the number to the color chart in the listing photos.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1–10 | Greens, Yellow \u0026amp; Orange\u003c\/strong\u003e\u003cbr\u003e1 Easter Green • 2 Peak Green • 3 Scallion Green • 4 Bambu Green • 5 Army Green • 6 Hunter Green • 7 Morandi Green • 8 Highlighter Yellow • 9 Yellow • 10 Orange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11–20 | Reds, Blues \u0026amp; Pink\u003c\/strong\u003e\u003cbr\u003e11 Pokeball Red • 12 Red • 13 Fire Engine Red (Maroon) • 14 Tiffany Blue • 15 Sky Blue • 16 Tropical Turquoise • 17 Royal Blue • 18 Blue • 19 Dark Blue • 20 Pink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e21–32 | Neutrals, Metallics \u0026amp; Purples\u003c\/strong\u003e\u003cbr\u003e21 Gray • 22 White • 23 Charcoal Black • 24 Black • 25 Beige • 26 Wood • 27 Matte Brown • 28 Gold • 29 Lilac Purple • 30 Willy Wonka Purple • 31 Purple • 32 Silver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33–42 | Specialty Filaments\u003c\/strong\u003e\u003cbr\u003e33 Transparent • 34 Green Transparent • 35 Galaxy Purple (Glitter) • 36 RGB Tri-Color (Shiny) • 37 Glow in the Dark (Blue Glow) • 38 Sparkling Blue Glow in the Dark • 39 Crystal Rainbow (Blue\/White Gradient) • 40 Galaxy Blue (Glitter) • 41 Steel Grey (Shiny) • 42 Blue Marble (Black Speckles)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSpecialty colors may have varying effects depending on the shape and orientation of the print.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42 colors. One Forge. An alarming number of unsupervised Yetis.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Frozen Forge","offers":[{"title":"Default Title","offer_id":67585467187385,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/6135\/2377\/files\/Screenshot2026-09-26201400.png?v=1790468098"},{"product_id":"silver-bar-storage-box-1oz-stackers-in-square-capsules-10-slot-holder-case","title":"Silver Bar Storage Box 1oz Stackers in Square Capsules 10 Slot Holder Case","description":"\u003cp\u003e\u003cstrong\u003e10 SLOT 1 OZ SILVER BAR STORAGE BOX\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(For the people who want their capsules snug, not swimming.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep Your Bars Organized, Protected, and Ready to Store\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and 3D printed in-house by Frozen Forge, this compact storage box holds up to 10 Squared Off capsules containing 1 oz silver bars or stackers.\u003c\/p\u003e\n\u003cp\u003eThis isn't a generic box that happens to fit them. Each slot is designed around Squared Off capsule dimensions for a tighter, cleaner fit with minimal side-to-side movement. NOTE: You can use both the rounded capsules and the sqaured off capsule in this box, however, the rounded edges will be loose (photo 3 and photo 4)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS\u003c\/strong\u003e\u003cbr\u003eBrand: Frozen Forge\u003cbr\u003eType: Silver Bar \/ Bullion Storage Box\u003cbr\u003eCapacity: 10 capsules\u003cbr\u003eDesigned For: 1 oz silver bars and stackers in Squared Off capsules\u003cbr\u003eMaterial: PLA \/ PLA+ (3D Printed)\u003cbr\u003eLid: Snug friction-fit with retention bumps\u003cbr\u003eColors: 42 available options\u003cbr\u003eMade In: USA\u003cbr\u003eWidth: Approximately 63 mm\u003cbr\u003eLength: Approximately 97 mm\u003cbr\u003eHeight: Approximately 56 mm\u003cbr\u003eWeight: Approximately 3–4 oz empty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAPSULE FIT \/ COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically around the outside dimensions of Squared Off capsules. The individual slots provide a tighter fit, keeping capsules securely positioned rather than moving around inside oversized compartments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAIR-TITE CAPSULES:\u003c\/strong\u003e Air-Tite capsules will also fit, but there will be additional room along the sides. If you prefer a snugger fit for Air-Tite capsules, we offer a separate box designed specifically around their dimensions.\u003c\/p\u003e\n\u003cp\u003ePlease review the comparison photos in this listing to see the difference in fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Fit is determined by the outside dimensions of the capsule, NOT simply the weight, size, or brand of the silver bar inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe do not guarantee compatibility based on the bar itself. Compatibility is determined by the capsule being used.\u003c\/strong\u003e Other capsule brands or styles may have different dimensions and may not fit as intended.\u003c\/p\u003e\n\u003cp\u003eUnsure about your capsules? Message us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE COLORS — 42 OPTIONS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnlike some of the competition, our Yetis don't believe in limiting your choices.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eChoose from over 40 filament colors, including metallic, glitter, glow-in-the-dark, and specialty finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO ORDER:\u003c\/strong\u003e Check the numbered color charts in the listing photos and send us your preferred color number (1–42).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEFAULT COLOR:\u003c\/strong\u003e If no color is specified, your box will be printed in Black (#24).\u003c\/p\u003e\n\u003cp\u003eThe complete color reference is at the bottom of this listing. Questions? Just ask!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; PRINT QUALITY\u003c\/strong\u003e\u003cbr\u003e• Holds up to 10 encapsulated 1 oz silver bars or stackers\u003cbr\u003e• Individual slots designed around Squared Off capsule dimensions\u003cbr\u003e• Tighter fit with minimal side-to-side movement\u003cbr\u003e• Compact, stackable storage design\u003cbr\u003e• Snug friction-fit lid with retention bumps\u003cbr\u003e• Designed and 3D printed in-house in the USA\u003cbr\u003e• Small-batch production, printed low and slow\u003c\/p\u003e\n\u003cp\u003eWe don't rush our prints to shave off a few minutes. Every box is produced with attention to finish, fit, and consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Yetis are impatient. We are not.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAs with any 3D-printed product, normal layer lines, surface texture, and a visible print seam may be present. These are characteristics of the printing process, not defects.\u003c\/p\u003e\n\u003cp\u003eOur photos show actual printed products. Your box may not be the exact one pictured, but it'll be about as close as a Yeti can get to you in the woods before you start asking questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABOUT THE LID\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box features a snug friction-fit lid with small retention bumps on the front and back. You should feel the lid seat into place when closed.\u003c\/p\u003e\n\u003cp\u003eTo open, hold the box by its sides and gently wiggle the lid left to right while pulling upward. Some initial resistance is normal, and the fit may loosen slightly with use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM CAPACITIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed more than 10 slots? We design and print everything ourselves and can often accommodate custom capacities. Message us with what you need!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003cbr\u003e• Silver bars, stackers, and capsules shown in photos are for display purposes only and are NOT included.\u003cbr\u003e• This box is designed around Squared Off capsule dimensions, not the bar itself.\u003cbr\u003e• Air-Tite capsules will fit with additional room along the sides. An Air-Tite-specific box is available for a tighter fit.\u003cbr\u003e• Other capsule brands or styles may not fit as intended.\u003cbr\u003e• Colors may vary slightly due to lighting, screen settings, and filament batches.\u003cbr\u003e• Specialty, gradient, and multicolor filaments may vary from print to print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFROZEN FORGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt for collectors. Printed by Yetis. Apparently.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWhy Yetis? We like Yetis. We also really like dogs, and one of ours is named Yeti. Somewhere along the way, the whole thing got out of hand, and now they apparently run the printers.\u003c\/p\u003e\n\u003cp\u003eEverything is designed and printed in-house in the USA. If we wouldn't use it ourselves, it doesn't leave the Forge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42-COLOR FILAMENT REFERENCE\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eMatch the number to the color chart in the listing photos.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1–10 | Greens, Yellow \u0026amp; Orange\u003c\/strong\u003e\u003cbr\u003e1 Easter Green • 2 Peak Green • 3 Scallion Green • 4 Bambu Green • 5 Army Green • 6 Hunter Green • 7 Morandi Green • 8 Highlighter Yellow • 9 Yellow • 10 Orange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11–20 | Reds, Blues \u0026amp; Pink\u003c\/strong\u003e\u003cbr\u003e11 Pokeball Red • 12 Red • 13 Fire Engine Red (Maroon) • 14 Tiffany Blue • 15 Sky Blue • 16 Tropical Turquoise • 17 Royal Blue • 18 Blue • 19 Dark Blue • 20 Pink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e21–32 | Neutrals, Metallics \u0026amp; Purples\u003c\/strong\u003e\u003cbr\u003e21 Gray • 22 White • 23 Charcoal Black • 24 Black • 25 Beige • 26 Wood • 27 Matte Brown • 28 Gold • 29 Lilac Purple • 30 Willy Wonka Purple • 31 Purple • 32 Silver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33–42 | Specialty Filaments\u003c\/strong\u003e\u003cbr\u003e33 Transparent • 34 Green Transparent • 35 Galaxy Purple (Glitter) • 36 RGB Tri-Color (Shiny) • 37 Glow in the Dark (Blue Glow) • 38 Sparkling Blue Glow in the Dark • 39 Crystal Rainbow (Blue\/White Gradient) • 40 Galaxy Blue (Glitter) • 41 Steel Grey (Shiny) • 42 Blue Marble (Black Speckles)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSpecialty colors may have varying effects depending on the shape and orientation of the print.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42 colors. One Forge. An alarming number of unsupervised Yetis.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Frozen Forge","offers":[{"title":"Default Title","offer_id":67585055654073,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/6135\/2377\/files\/Screenshot2026-10-22163028.png?v=1792701079"},{"product_id":"10oz-silver-bar-storage-box-holder-holds-5x-10oz-bars","title":"10oz Silver Bar Storage Box Holder - Holds 5x 10oz Bars","description":"\u003cp\u003e\u003cstrong\u003e5 SLOT 10 OZ SILVER STACKER BAR STORAGE BOX\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Because ten ounces deserves a little more elbow room.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep Your Bars Organized, Protected, and Ready to Store\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and 3D printed in-house by Frozen Forge, this storage box holds up to 5 compatible 10 oz silver stacker bars horizontally in individual slots.\u003c\/p\u003e\n\u003cp\u003eEach bar gets its own space, keeping heavier bullion separated, organized, and easier to store than having everything piled loosely together in a drawer or safe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS\u003c\/strong\u003e\u003cbr\u003eBrand: Frozen Forge\u003cbr\u003eType: Silver Bar \/ Bullion Storage Box\u003cbr\u003eCapacity: 5 bars\u003cbr\u003eDesigned For: 10 oz silver stacker bars matching the style shown in the listing photos\u003cbr\u003eStorage: Individual horizontal slots\u003cbr\u003eMaterial: PLA \/ PLA+ (3D Printed)\u003cbr\u003eLid: Removable friction-fit\u003cbr\u003eColors: 42 available options\u003cbr\u003eMade In: USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFIT \/ COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box is designed specifically around the physical dimensions and squared-corner shape of the 10 oz silver stacker bars shown in the listing photographs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE REVIEW THE LAST LISTING PHOTO.\u003c\/strong\u003e It shows the specific bar style this storage box was designed to accommodate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Fit is based on the actual length, width, thickness, and shape of the bar, NOT simply its 10 oz silver weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe do not guarantee compatibility with every 10 oz silver bar. Confirmed fit applies to the bar style and dimensions used to design this box.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDifferent manufacturers may produce bars with rounded corners, raised surfaces, different thicknesses, or oversized dimensions. Those bars may not fit as intended.\u003c\/p\u003e\n\u003cp\u003eOther similarly sized bars may fit, but compatibility has not necessarily been tested.\u003c\/p\u003e\n\u003cp\u003eUnsure about your bars? Send us a message with their dimensions before ordering, and we'll help determine whether this design is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE COLORS — 42 OPTIONS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnlike some of the competition, our Yetis don't believe in limiting your choices.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eChoose from over 40 filament colors, including metallic, glitter, glow-in-the-dark, and specialty finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO ORDER:\u003c\/strong\u003e Check the numbered color charts in the listing photos and send us your preferred color number (1–42).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEFAULT COLOR:\u003c\/strong\u003e If no color is specified, your box will be printed in Black (#24).\u003c\/p\u003e\n\u003cp\u003eThe complete color reference is at the bottom of this listing. Questions? Just ask!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; PRINT QUALITY\u003c\/strong\u003e\u003cbr\u003e• Holds up to 5 compatible 10 oz silver stacker bars\u003cbr\u003e• Individual horizontal slots keep bars separated and organized\u003cbr\u003e• Designed for the squared-corner bar style shown in the photos\u003cbr\u003e• Compact storage design for heavier bullion\u003cbr\u003e• Snug, removable friction-fit lid\u003cbr\u003e• Designed and 3D printed in-house in the USA\u003cbr\u003e• Small-batch production, printed low and slow\u003c\/p\u003e\n\u003cp\u003eWe don't rush our prints to shave off a few minutes. Every box is produced with attention to finish, fit, and consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Yetis are impatient. We are not.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAs with any 3D-printed product, normal layer lines, surface texture, and a visible print seam may be present. These are characteristics of the printing process, not defects.\u003c\/p\u003e\n\u003cp\u003eOur photos show actual printed products. Your box may not be the exact one pictured, but it'll be about as close as a Yeti can get to you in the woods before you start asking questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABOUT THE LID\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box features a snug, removable friction-fit lid without clips or latches.\u003c\/p\u003e\n\u003cp\u003eIf the lid feels tight when new, gently wiggle it side to side while pulling upward. Some initial resistance is intentional, and the fit may loosen slightly with use.\u003c\/p\u003e\n\u003cp\u003eThe lid is intended to keep the contents enclosed during storage. Because this box may contain up to 50 oz of silver, always support the bottom of the box when lifting or moving it. Do not lift a loaded box by the lid alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM CAPACITIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed more or fewer than 5 slots? We design and print everything in-house and may be able to accommodate other capacities depending on the dimensions and weight of your bars.\u003c\/p\u003e\n\u003cp\u003eMessage us with what you need, and we'll see what the Yetis can manage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003cbr\u003e• Silver bars, bullion, and other items shown in photos are for display purposes only and are NOT included.\u003cbr\u003e• This box is designed around the physical dimensions of the squared-corner 10 oz bar style pictured in the listing.\u003cbr\u003e• Other bar brands, shapes, or sizes are not guaranteed to fit.\u003cbr\u003e• Always support the bottom of the box when lifting or moving it with bullion inside.\u003cbr\u003e• Colors may vary slightly due to lighting, screen settings, and filament batches.\u003cbr\u003e• Specialty, gradient, and multicolor filaments may vary from print to print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFROZEN FORGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt for collectors. Printed by Yetis. Apparently.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWhy Yetis? We like Yetis. We also really like dogs, and one of ours is named Yeti. Somewhere along the way, the whole thing got out of hand, and now they apparently run the printers.\u003c\/p\u003e\n\u003cp\u003eEverything is designed and printed in-house in the USA. If we wouldn't use it ourselves, it doesn't leave the Forge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42-COLOR FILAMENT REFERENCE\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eMatch the number to the color chart in the listing photos.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1–10 | Greens, Yellow \u0026amp; Orange\u003c\/strong\u003e\u003cbr\u003e1 Easter Green • 2 Peak Green • 3 Scallion Green • 4 Bambu Green • 5 Army Green • 6 Hunter Green • 7 Morandi Green • 8 Highlighter Yellow • 9 Yellow • 10 Orange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11–20 | Reds, Blues \u0026amp; Pink\u003c\/strong\u003e\u003cbr\u003e11 Pokeball Red • 12 Red • 13 Fire Engine Red (Maroon) • 14 Tiffany Blue • 15 Sky Blue • 16 Tropical Turquoise • 17 Royal Blue • 18 Blue • 19 Dark Blue • 20 Pink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e21–32 | Neutrals, Metallics \u0026amp; Purples\u003c\/strong\u003e\u003cbr\u003e21 Gray • 22 White • 23 Charcoal Black • 24 Black • 25 Beige • 26 Wood • 27 Matte Brown • 28 Gold • 29 Lilac Purple • 30 Willy Wonka Purple • 31 Purple • 32 Silver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33–42 | Specialty Filaments\u003c\/strong\u003e\u003cbr\u003e33 Transparent • 34 Green Transparent • 35 Galaxy Purple (Glitter) • 36 RGB Tri-Color (Shiny) • 37 Glow in the Dark (Blue Glow) • 38 Sparkling Blue Glow in the Dark • 39 Crystal Rainbow (Blue\/White Gradient) • 40 Galaxy Blue (Glitter) • 41 Steel Grey (Shiny) • 42 Blue Marble (Black Speckles)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSpecialty colors may have varying effects depending on the shape and orientation of the print.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e42 colors. One Forge. An alarming number of unsupervised Yetis.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Frozen Forge","offers":[{"title":"Default Title","offer_id":67873012711609,"sku":null,"price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/6135\/2377\/files\/Screenshot2026-10-22173911.png?v=1792705204"}],"url":"https:\/\/thefrozenforge.com\/collections\/stackers.oembed","provider":"Frozen Forge","version":"1.0","type":"link"}