Silver Bar Storage Box 1oz Stackers in Square Capsules 10 Slot Holder Case

10 SLOT 1 OZ SILVER BAR STORAGE BOX
(For the people who want their capsules snug, not swimming.)

Keep Your Bars Organized, Protected, and Ready to Store

Designed and 3D printed in-house by Frozen Forge, this compact storage box holds up to 10 Squared Off capsules containing 1 oz silver bars or stackers.

This isn't a generic box that happens to fit them. Each slot is designed around Squared Off capsule dimensions for a tighter, cleaner fit with minimal side-to-side movement. NOTE: You can use both the rounded capsules and the sqaured off capsule in this box, however, the rounded edges will be loose (photo 3 and photo 4)

DETAILS
Brand: Frozen Forge
Type: Silver Bar / Bullion Storage Box
Capacity: 10 capsules
Designed For: 1 oz silver bars and stackers in Squared Off capsules
Material: PLA / PLA+ (3D Printed)
Lid: Snug friction-fit with retention bumps
Colors: 42 available options
Made In: USA
Width: Approximately 63 mm
Length: Approximately 97 mm
Height: Approximately 56 mm
Weight: Approximately 3–4 oz empty

CAPSULE FIT / COMPATIBILITY

Designed specifically around the outside dimensions of Squared Off capsules. The individual slots provide a tighter fit, keeping capsules securely positioned rather than moving around inside oversized compartments.

AIR-TITE CAPSULES: Air-Tite capsules will also fit, but there will be additional room along the sides. If you prefer a snugger fit for Air-Tite capsules, we offer a separate box designed specifically around their dimensions.

Please review the comparison photos in this listing to see the difference in fit.

IMPORTANT: Fit is determined by the outside dimensions of the capsule, NOT simply the weight, size, or brand of the silver bar inside.

We do not guarantee compatibility based on the bar itself. Compatibility is determined by the capsule being used. Other capsule brands or styles may have different dimensions and may not fit as intended.

Unsure about your capsules? Message us before ordering.

AVAILABLE COLORS — 42 OPTIONS!

Unlike some of the competition, our Yetis don't believe in limiting your choices.

Choose from over 40 filament colors, including metallic, glitter, glow-in-the-dark, and specialty finishes.

HOW TO ORDER: Check the numbered color charts in the listing photos and send us your preferred color number (1–42).

DEFAULT COLOR: If no color is specified, your box will be printed in Black (#24).

The complete color reference is at the bottom of this listing. Questions? Just ask!

FEATURES & PRINT QUALITY
• Holds up to 10 encapsulated 1 oz silver bars or stackers
• Individual slots designed around Squared Off capsule dimensions
• Tighter fit with minimal side-to-side movement
• Compact, stackable storage design
• Snug friction-fit lid with retention bumps
• Designed and 3D printed in-house in the USA
• Small-batch production, printed low and slow

We don't rush our prints to shave off a few minutes. Every box is produced with attention to finish, fit, and consistency.

The Yetis are impatient. We are not.

As with any 3D-printed product, normal layer lines, surface texture, and a visible print seam may be present. These are characteristics of the printing process, not defects.

Our photos show actual printed products. Your box may not be the exact one pictured, but it'll be about as close as a Yeti can get to you in the woods before you start asking questions.

ABOUT THE LID

This box features a snug friction-fit lid with small retention bumps on the front and back. You should feel the lid seat into place when closed.

To open, hold the box by its sides and gently wiggle the lid left to right while pulling upward. Some initial resistance is normal, and the fit may loosen slightly with use.

CUSTOM CAPACITIES

Need more than 10 slots? We design and print everything ourselves and can often accommodate custom capacities. Message us with what you need!

PLEASE NOTE
• Silver bars, stackers, and capsules shown in photos are for display purposes only and are NOT included.
• This box is designed around Squared Off capsule dimensions, not the bar itself.
• Air-Tite capsules will fit with additional room along the sides. An Air-Tite-specific box is available for a tighter fit.
• Other capsule brands or styles may not fit as intended.
• Colors may vary slightly due to lighting, screen settings, and filament batches.
• Specialty, gradient, and multicolor filaments may vary from print to print.

FROZEN FORGE

Built for collectors. Printed by Yetis. Apparently.

Why Yetis? We like Yetis. We also really like dogs, and one of ours is named Yeti. Somewhere along the way, the whole thing got out of hand, and now they apparently run the printers.

Everything is designed and printed in-house in the USA. If we wouldn't use it ourselves, it doesn't leave the Forge.

42-COLOR FILAMENT REFERENCE
Match the number to the color chart in the listing photos.

1–10 | Greens, Yellow & Orange
1 Easter Green • 2 Peak Green • 3 Scallion Green • 4 Bambu Green • 5 Army Green • 6 Hunter Green • 7 Morandi Green • 8 Highlighter Yellow • 9 Yellow • 10 Orange

11–20 | Reds, Blues & Pink
11 Pokeball Red • 12 Red • 13 Fire Engine Red (Maroon) • 14 Tiffany Blue • 15 Sky Blue • 16 Tropical Turquoise • 17 Royal Blue • 18 Blue • 19 Dark Blue • 20 Pink

21–32 | Neutrals, Metallics & Purples
21 Gray • 22 White • 23 Charcoal Black • 24 Black • 25 Beige • 26 Wood • 27 Matte Brown • 28 Gold • 29 Lilac Purple • 30 Willy Wonka Purple • 31 Purple • 32 Silver

33–42 | Specialty Filaments
33 Transparent • 34 Green Transparent • 35 Galaxy Purple (Glitter) • 36 RGB Tri-Color (Shiny) • 37 Glow in the Dark (Blue Glow) • 38 Sparkling Blue Glow in the Dark • 39 Crystal Rainbow (Blue/White Gradient) • 40 Galaxy Blue (Glitter) • 41 Steel Grey (Shiny) • 42 Blue Marble (Black Speckles)

Specialty colors may have varying effects depending on the shape and orientation of the print.

42 colors. One Forge. An alarming number of unsupervised Yetis.